FTM-400DR Cross Band

It does have cross band. It is not in the operation manual.

FTM-400DR Cross Band Repeat:

Initial setting

· Set [A] band, [B] band in different band VHF/UHF or UHF/VHF.
· Turn the APRS MODEM setting OFF.
· Set signaling in CTCSS or DCS, as desired possible [A] band, [B] band individual treatment setting.
· Start Cross Band Repeat mode movement while pushing the DISP + F + GM key when I do power supply ON.
· During Cross Band Repeat mode, it becomes a mode for exclusive use of the analog.
· The cancellation of Cross Band Repeat mode, while pushing the DISP + F + GM key when I do power supply ON.
· There is no setting of the CW ID transmission in Cross Band Repeat mode.
Labels: , , , ,

1 comment:

  1. Anonymous1/14/2016

    I can confirm that cross band repeat is available and does function. Just not documented in the manual.

    ReplyDelete


Comments may take a day to show up

Digital Ham Radio / Amateur Radio
DigitalHamRADIO@groups.io
https://groups.io/g/DigitalHamRADIO

Yaesu FT-991(A) Users Group (groups.io)
https://groups.io/g/Yaesu-FT-991

www.FT991a.com
www.FTDX10.com
.

Note: only a member of this blog may post a comment.

Subscribe to: Post Comments (Atom)